Instructions for Electric Blankets

Instructions for the electric snuggles & Electric Mattress Toppers.

 To turn on: press the on/off button (located in middle of controller) the light on the screen will come on. (Larger button) note: the light will turn itself off after one minute; the blanket however will still be ON, just press any button to make like screen light up again.

To adjust the temperature: use the up and down buttons located on the left side of the controller. Note: if you do not adjust the temperature, after 1 hour it will turn itself down to level 3. You just have to manually adjust it to the level you desire.

To adjust the timer: use the up and down buttons on the right side of the controller. Note: if you don’t touch the timer, it will stay on for 10 hours and then switch itself off. If you set the do set the timer, e.g. 2 hours, the blanket will turn off after 2 hours.

To turn off: press the on/off button in the middle of the controller and make sure light goes out.

Instructions for the electric snuggles

*7 Step heating (only has 2 buttons on controller)

To turn on: Hold the power button (Left side of controller) for 3 seconds until either a letter or a number appears on the screen.

To adjust the temperature: use the right side button to adjust to desired temperature which range from L (low) 1 – 2 – 3 – 4 – 5 – 6 – H (high)

To turn off: press the power button (left side of the controller) and hold for 3 seconds until the screen goes blank.

* 10 step heating (has 5 buttons on controller)

To turn on: press the on/off button (located in middle of controller) the light on the screen will come on.

To adjust the temperature: use the up and down buttons located on the left side of the controller.

To adjust the timer: use the up and down buttons on the right side of the controller.

To turn off: press the on/off button in the middle of the controller and make sure light goes out.